EZARM 401
SCOPE
This specification covers the requirement for EZARM 401 cable.
MECHANICAL
INNER CONDUCTOR1: Solid silver-plated copper, AWG 14 gage, 0.064 inch (1.628 mm) nominal diameter
DIELECTRIC2: Solid PTFE teflon, 0.209 inch (5.309 mm) nominal outer diameter
INNER SHIELD3: Silver-plated copper strip, 0.217 inch (5.512 mm) nominal outer diameter
OUTER SHIELD4: Silver-plated copper braid, AWG 40, 0.233 inch (5.918 mm) nominal outer diameter
OUTER JACKET5: Extruded blue FEP teflon, 0.265 inch (6.731 mm) nominal outer diameter, marked "EZ FLEX 401" at approximately 6 inch intervals
ARMOR JACKET6: Stainless Steel, 0.485 inch (12.32 mm) nominal outer diameter
COMPRESSRION WITHSTANDING FORCE: 4000 lbs./linear inch
OPERATING TEMP: -65°C to +200°C
ELECTRICAL
ELECTRICAL

CHARACTERISTIC IMPEDANCE: 50 ohms +-2 ohms
VELOCITY OF PROPAGATION: 70% nominal
DIELECTRIC CONSTANT: 2.04 nominal
VOLTAGE WITHSTANDING: 7500 vrms @ 60 hz
CORONA EXTINCTION VOLTAGE: 3000 vrms @ 60 hz
MAXIMUM OPERATING FREQUENCY: 18 GHz

TYPICAL ATTENUATION (20°C):
Frequency(GHz) db/100ft Power (CW Watts)
0.4 4.2 13.8
2.0 10.0 32.8
6.0 19.4 63.7
10.0 27.6 90.6
18.0 41.4 135.7