EZARM 402
SCOPE
This specification covers the requirement for EZARM 402 cable.
MECHANICAL
INNER CONDUCTOR1: Solid silver-plated copper weld, AWG 19 gage, 0.036 inch (0.914 mm) nominal diameter
DIELECTRIC2: Solid PTFE teflon, 0.117 inch (2.972 mm) nominal outer diameter
INNER SHIELD3: Silver-plated copper strip, 0.125 inch (3.175 mm) nominal outer diameter
OUTER SHIELD4: Silver-plated copper braid, AWG 40 gage copper braid, 0.141 inch (3.581 mm) nominal outer diameter
OUTER JACKET5: Extruded blue FEP teflon, 0.163 inch (4.140 mm) nominal outer diameter, marked "EZ FLEX 402" at approximately 6 inch intervals
ARMOR JACKET6: Stainless Steel, 0.305 inch (7.747 mm) nominal outer diameter
OPERATING TEMP: -65°C to +200°C
ELECTRICAL
ELECTRICAL

CHARACTERISTIC IMPEDANCE: 50 ohms +-2 ohms
VELOCITY OF PROPAGATION: 70% nominal
DIELECTRIC CONSTANT: 2.04 nominal
VOLTAGE WITHSTANDING: 5000 vrms @ 60 hz
CORONA EXTINCTION VOLTAGE: 1900 vrms min. @ 60 hz
MAXIMUM OPERATING FREQUENCY: 20 GHz

TYPICAL ATTENUATION (20°C):
Frequency(GHz) db/100ft Power (CW Watts)
0.5 7.8 25.6
2.0 16.8 55.1
6.0 31.3 102.7
10.0 42.4 139.1
18.0 60.9 200.0
20.0 63.4 208.0